Canonsburg, PA – SciCan has set the benchmark for sterilization and instrument reprocessing technology.
For more than 20 years SciCan has been developing and manufacturing highly innovative infection control products that address the need for versatility, flexibility, and efficiency in today’s environments.
SciCan is proud to unveil the newest STATIM family member, the G4 series. The STATIM G4 series is the same renowned and trusted autoclave it has been for over 20 years but now boasts a new contemporary look, functionality and connectivity that is the first of its kind. The G4 technology will change the way you interact by providing a direct channel of communication through the Internet to increase productivity and limit downtime.
Still powered by SciCan’s signature steam technology to provide sterilization at speeds faster than conventional chambered autoclaves, the STATIM G4 series has been drastically upgraded with a level of interactivity not seen before.
The STATIM G4 series has been modernized with a new fascia that is fresh and contemporary.
A large 3.5” high-resolution touchscreen offers a vivid display of messages and current cycle information all with extraordinary clarity. The bubble level has been integrated into the high-resolution touchscreen.
Gone are the days of messy thermal paper, clumsy printers or potential failures with external data loggers. With increasing stringency amongst national guidelines, the STATIM G4 series now saves all the data from each cycle. This data can be copied onto the included USB drive, viewed on screen, or remotely stored in the Cloud via email.*
SciCan's STATIM G4 series Technology offers a platform with endless possibilities. The product expansion and modes of communication will provide visibility from every facet, from usability to troubleshooting.
This is a very exciting time for SciCan, as we are embarking into new territory with cutting edge technology. SciCan has always demonstrated innovation and this is just another example of how we are setting new standards for infection control.
For more information on the Statim G4 series of autoclaves please visit our website at www.scicanusa.com
*Based on your email providers storage capabilities
This model has all the benefits of our classic STATIM 2000 Cassette Autoclave
|Sterilization time||3.5 minutes||10 minutes||15 minutes|
|Sterilization temp.||135º C||135º C||121º C|
|Total cycle time||6 minutes||14 minutes||20 minutes|
|Unit Size :||L 480mm x W 415mm x H 150mm
L 19" x W 16.25" x H 6"
|Cassette Internal Dimensions :||L 280mm x W 180mm x H 35mm
L 11" x W 7" x H 1.5"
|Reservoir Capacity :||4.0 litres (distilled water) Approximately 40 cycles|
|Weight without water :||21 kg/46 lbs|
|Power Consumption :||110-120 V, 60Hz, 1300 W|
When you receive your Statim 2000 packing carton, the items listed below will be included.
If any of the items are missing, contact us immediately so that the situation can be corrected.
*The use of STATIM sterilizers was introduced to the body art field in the early 1990's by Brian Skellie at Piercing Experience, and developed in community along with other practical innovations in applied safety precautions and techniques.
Infection control products and practices
Sterilization and equipment maintenance
-STATIM autoclave work practices
-HYDRIM automatic instrument washer work practices
Jewelry safety standards
-Finishing and customizing jewelry
--Anodizing: passivating and coloring titanium and niobium
The Statim 2000 autoclave is the cornerstone of our body piercing sterilization. I am the manager and main piercer at our studio so my day can be very hectic trying to juggle both positions at the same time. With our Statim I can cut out the time it would take to pre-package and process all tools and jewelry. Not to mention the amount of waste that is accumulated in gloves and packaging by undertaking such an arduous and time consuming task. There are no expired packs that need to be reprocessed, and jewelry stock takes up a lot less space!
It is impressive and reassuring to our clients to see their entire piercing setup packed and run (with a pass/fail sterilization integrator) in front of them. While the six minute cycle is running I have time to discuss any concerns my clients may have as well as give them detailed aftercare instructions. The best part is the ability to transport the entire procedure setup to the piercing room in a sealed cassette that opens, once again, in front of the client.
I love — honestly love — my Statim and am currently considering getting a Statim tattooed on my body!
Brian W Skellie
Owner & Piercer
Brian founded Piercing Experience in 1992 as a piercer inspired to research and evolve safe body modification and share the results with the community. Apart from work as a dealer for infection control products, he is an educator who has presented many seminars and workshops at conferences in North and South America and Europe. He is a frequent APP contributor ever since the first conference, an active business member since 1996, former editor of The Point Journal, completed three terms as a Board member as Treasurer, International Liaison and President, and commenced his fourth term as Medical director in 2017.
Brian celebrates over 25 years of sharing his body art expertise with his clients, colleagues and friends. He specializes in body piercing, safety standards, STATIM autoclaves and HYDRIM automated instrument washers, and is an authorized dealer for the SciCan family of products. He offers expert consultation and training for streamlined workflow for Body Art Professionals. As a long time member of ASTM International and the APP, he develops, interprets and publishes evidence based standards for continual improvement in the field of Body Arts.