VistaPure™ provides two grades of high-quality water for autoclaves, dental bottles, ultrasonic cleaners and instrument washers for the ultimate convenience.
VistaPure will work with the STATIM® Cassette Autoclaves, BRAVO™ Chamber Autoclaves, HYDRIM® Instrument Washers, Ultrasonic Cleaners, Dental Bottles, other select sterilizers and automated washers.
Water is autoclave-ready, distilled quality (deionized) water which eliminates the need to buy distilled water or own a distiller.
VistaPure’s handheld, point-and-shoot wand makes it easy for anyone to fill autoclaves, no matter where they’re located, and the system’s mounted faucet makes it easy to fill Dental Unit bottles over a sink. We will also offer unique “automatic water filling control” options for our STATIM and BRAVO sterilizers along with our HYDRIM final rinse options.
VistaPure’s filter panel fits neatly under the steri-center counter with slides for easy access to the filters.
VistaPure provides a high volume of ready-to-use water, on demand. Its large 4.25-gallon storage tank means you don’t need to wait for deionization and R/O processes to take place.
Each VistaPure features an in-line TDS meter that monitors water quality—and also makes it easy to know when it’s time to replace your filters.
VistaPure accessories include patented AutoFill devices designed to replenish SciCan STATIM and BRAVO autoclaves with distilled-quality water automatically, enabling truly hands-free convenience. An optional adapter kit is also available for utilizing VistaPure’s hyper-filtered water for the final rinse cycle of instrument washers.
Inside Dentistry, Feb 2016
VistaPure’s patented AutoFill accessories replenish SciCan STATIM®and BRAVO™ autoclaves with distilled-quality water automatically — enabling truly hands-free convenience.
VistaPure AutoFill accessory kits work with all VistaPure systems and can be installed easily on any STATIM 2000/G4 or STATIM 5000/G4, or any BRAVO autoclave, in just a few minutes!
A 12-foot length of clear polyurethane tubing is already attached to the AutoFill manifold. If the desired distance between the connection to the VistaPure and the autoclave is greater than 12 feet, simply order a longer length of the clear polyurethane tubing, as the distance from the VistaPure to the autoclave is not limited, except by the feed tubing.
The VistaPure AutoFill for STATIM device (S3020) can be installed on any STATIM 2000/G4 or STATIM 5000/G4 autoclave as follows:https://www.scican.com/us/media/water-management/SD-491_US_EN%20R1_Autofill_Sell%20Sheet_20160805_PRNT.pdf
The VistaPure AutoFill for BRAVO device (S3030) can be installed on any model BRAVO autoclave.
In order to connect the VistaPure AutoFill to the BRAVO, one of the two tanks that come with the BRAVO must be selected as a “relay tank” since the BRAVO system uses a suction-lift pump to fill its reservoir when in its automatic-filling mode. Note that the relay tank must be located within 6 feet of the BRAVO unit, due to the suction-lift capacity of the BRAVO pump.
Infection control products and practices
Sterilization and equipment maintenance
-STATIM autoclave work practices
-HYDRIM automatic instrument washer work practices
Jewelry safety standards
-Finishing and customizing jewelry
--Anodizing: passivating and coloring titanium and niobium
The Statim 2000 autoclave is the cornerstone of our body piercing sterilization. I am the manager and main piercer at our studio so my day can be very hectic trying to juggle both positions at the same time. With our Statim I can cut out the time it would take to pre-package and process all tools and jewelry. Not to mention the amount of waste that is accumulated in gloves and packaging by undertaking such an arduous and time consuming task. There are no expired packs that need to be reprocessed, and jewelry stock takes up a lot less space!
It is impressive and reassuring to our clients to see their entire piercing setup packed and run (with a pass/fail sterilization integrator) in front of them. While the six minute cycle is running I have time to discuss any concerns my clients may have as well as give them detailed aftercare instructions. The best part is the ability to transport the entire procedure setup to the piercing room in a sealed cassette that opens, once again, in front of the client.
I love — honestly love — my Statim and am currently considering getting a Statim tattooed on my body!
Brian W Skellie
Owner & Piercer
Brian founded Piercing Experience in 1992 as a piercer inspired to research and evolve safe body modification and share the results with the community. Apart from work as a dealer for infection control products, he is an educator who has presented many seminars and workshops at conferences in North and South America and Europe. He is a frequent APP contributor ever since the first conference, an active business member since 1996, former editor of The Point Journal, completed three terms as a Board member as Treasurer, International Liaison, President, and Medical director. He commenced his fifth term as CIO in 2020.
Brian celebrates over 25 years of sharing his body art expertise with his clients, colleagues and friends. He specializes in body piercing, safety standards, STATIM autoclaves and HYDRIM automated instrument washers, and is an authorized dealer for the SciCan family of products. He offers expert consultation and training for streamlined workflow for Body Art Professionals. As a long time member of ASTM International and the APP, he develops, interprets and publishes evidence based standards for continual improvement in the field of Body Arts.